What should I do if the lighter cannot make fire? Summary of popular solutions across the network
As a common tool in daily life, lighters suddenly become unable to start a fire, which will cause a lot of inconvenience. This article combines popular discussions and practical tips across the Internet in the past 10 days to sort out systematic solutions for you, and presents common fault causes and corresponding treatment methods through structured data.
1. Data statistics on popular lighter-related topics across the Internet in the past 10 days
| Ranking | Topic keywords | Number of discussions (10,000) | main focus |
|---|---|---|---|
| 1 | The lighter is out of gas | 28.6 | Identification of inflation methods |
| 2 | Flintstone replacement | 19.3 | DIY replacement tutorial |
| 3 | Windproof lighter repair | 15.2 | Nozzle cleaning tips |
| 4 | Electronic ignition failure | 12.8 | Circuit maintenance methods |
2. Comparison table of common fault types and solutions
| Fault phenomenon | Possible reasons | solution | Tool requirements |
|---|---|---|---|
| No sparks at all | 1. Running out of flint and steel 2. Spring failure 3. Electronic components are damaged | 1. Replace the flint stone 2.Adjust spring pressure 3. Professional maintenance | Special flint and tweezers |
| There is a spark but no fire | 1. Low fuel 2. The air valve is blocked 3. The temperature is too low | 1. Replenish fuel 2. Clean the nozzle 3. Preheat the body | Special gas tank, toothpick |
| Flame is unstable | 1. Mix in air 2. Regulator failure 3. Aging of sealing ring | 1.Exhaust gas 2.Adjust the flame size 3. Replace seals | small screwdriver |
3. Step-by-step troubleshooting guide
Step One: Basic Check
1. Confirm the remaining fuel level (judge by shaking and listening)
2. Check whether the spark wheel rotates normally
3. Observe the spark generation (pay attention to the safe distance)
Step 2: In-depth maintenance
1. Clean the ignition device: Use a cotton swab dipped in alcohol to clean the spark hole
2. Adjust the flame valve: turn it counterclockwise to increase the air supply.
3. Check the tightness: immerse the lighter in water and observe the bubbles (metal body only)
4. Special treatment for lighters made of different materials
| Material type | Prone to failure | Maintenance points |
|---|---|---|
| Plastic body | Air valve leaking | Avoid exposure to sunlight and replace sealing rings regularly |
| Metal body | circuit oxidation | Sand the electrode contacts with sandpaper |
| Windproof style | Nozzle clogged | Use a needle to clear air supply lines |
5. Safety precautions
1. Be sure to drain the remaining fuel before servicing
2. Do not operate in flammable environments
3. Electronic lighters need to be discharged before disposal
4. Children should keep away from maintenance tools and parts.
6. Recommendation of alternatives
When the lighter cannot be repaired immediately, consider:
• Temporary substitute for matches (pay attention to moisture)
• Induction cooker igniter loan
• Battery + tin foil emergency ignition method (requires professional guidance)
Through the above systematic solutions, more than 90% of lighter failures can be effectively solved. If you still cannot repair it after trying all methods, it is recommended to buy a new lighter (according to data from the entire Internet, the average service life of ordinary lighters is 3-6 months). Bookmark this article so you can quickly find the solution next time you encounter a spark problem!
check the details
check the details
en
